Home / Products / Electric Forklifts / FS-CPD18
The FS-CPD18 is the 1.8-ton member of our compact electric counterbalance range. It uses the same 1,960 mm turning radius and 1,130 mm overall width as the FS-CPD15, but carries a heavier counterweight so it can take denser loads without stepping up to a full 2.0-ton truck. That makes it the right choice for beverage cases, tile, bagged goods and full pallets of fasteners — loads where a 1.5 t truck is marginal and a 2.0 t truck is more capacity than the aisle or the budget allows.
Rated capacity rises to 1,800 kg at a 500 mm load center and service weight to 3,000 kg, with no change to overall length (2,160 mm) or width (1,130 mm). The trade-off is measurable: laden gradeability is 15% rather than 20%, and lift speed is 300 / 400 mm/s rather than 320 / 400 mm/s.
A CAN-bus controller coordinates the drive motor, pump motor and battery in real time, while the multifunction LCD display shows operating status, hour meter and fault codes — so operators spot issues early and service teams fix them fast.
The 76.8 V / 125 Ah LiFePO4 pack with smart BMS charges fully in about 2 hours and accepts opportunity charging between tasks; a lead-acid version is available for budgets that prefer it.
Electric power flows directly from the AC traction motor to the front drive axle — quick starts from standstill, high energy utilization and none of the maintenance a mechanical transmission demands.
Energy captured while slowing down is converted back into the battery, extending runtime on every charge and reducing wear on the brake components.
Widened mast channels give the operator a clear view of the fork tips and load at height. The 3,000 mm two-stage mast is standard; taller three-stage masts are available on request for higher racking.
The battery sits low in a short, rigid chassis, keeping the center of gravity close to the ground for stable lifting and a minimum turning radius of just 1,960 mm.
The battery is carried in the mid-lower body and can be drawn out sideways, so a charged spare pack can be exchanged quickly and daily maintenance checks stay simple.
Standard 920 × 100 × 35 mm forks slide across a 210–1,025 mm range to handle different pallet widths, and a hydraulic side shifter is available on the FS-CPD18 for faster load positioning.
A hydraulic foot brake provides progressive stopping power, while an electromagnetic parking brake holds the truck firmly whenever it is parked — no rollback on ramps or dock plates.
Shipped with a Certificate of Origin and sea-freight export packing with the mast detached and re-secured on arrival. Container loading is on request — units per 20GP / 40HQ are confirmed by model, mast, battery and packing.
| Model | FS-CPD18 (SJ03-L125) |
|---|---|
| Power type | Electric (battery) |
| Operation type | Sit-down counterbalance |
| Voltage platform (V) | 80 |
| Rated capacity | 1,800 kg at 500 mm load center |
| Load centre (mm) | 500 |
| Parameter | Value |
|---|---|
| Service weight (kg) | 3,000 (including lithium battery) |
| Front overhang (mm) | 415 |
| Wheelbase (mm) | 1,410 |
| Overall length (mm) | 2,160 (to fork face) |
| Overall width (mm) | 1,130 |
| Overhead guard height (mm) | 2,100 |
| Lift height h3 (mm) | 3,000 two-stage mast |
| Collapsed mast height (mm) | 1,985 (3,000 mm mast) |
| Free lift height (mm) | 135 (3,000 mm mast) |
| Extended max height (mm) | 4,045 (3,000 mm mast) |
| Mast options | Two-stage 3,000 mm standard; other heights on request |
| Mast tilt fwd/back (°) | 6 / 12 |
| Fork size T × W × L (mm) | 920 × 100 × 35 |
| Fork adjustment range (mm) | 210–1,025 |
| Wheels (x = drive) | 2x / 2 |
| Front tire | 6.50-10-10PR |
| Rear tire | 5.00-8-8PR |
| Front tread (mm) | 925 |
| Rear tread (mm) | 930 |
| Tire type | Pneumatic standard; solid (non-marking optional) |
| Mast ground clearance (mm) | 100 |
| Frame min. ground clearance (mm) | 85 |
| Max travel speed (laden/unladen) (km/h) | 15 / 15 |
|---|---|
| Max lift speed (laden/unladen) (mm/s) | 300 / 400 |
| Lowering speed (laden/unladen) (mm/s) | 480 |
| Max drawbar pull (laden) (N) | 11,000 |
| Gradeability (laden/unladen) (%) | 15 / 20 |
| Min. turning radius (mm) | 1,960 |
| Parameter | Value | ||
|---|---|---|---|
| Traction motor power (kW) | AC 10 | ||
| Pump (lift) motor power (kW) | AC 16 | ||
| Motor type | AC drive and lift motors, CAN-bus control | ||
| Battery type | LiFePO4 lithium with smart BMS (lead-acid optional) | ||
| Battery voltage (V) | 76.8 | Battery capacity (Ah) | 125 (lithium; lead-acid optional) |
| Battery weight (kg) | ~170 (standard 125 Ah pack) | ||
| Battery warranty | 5 years / 10,000 hours on cells | ||
| Battery charger | 80 V smart charger; input 220 V, 50/60 Hz configurable | ||
| Controller type | CAN-bus controller with multifunction LCD display | ||
| Service brake | Hydraulic foot brake with regenerative braking | ||
| Parking brake | Electromagnetic parking brake | ||
| Hydraulic system pressure (MPa) | 17.5 |
| MOQ | 1 unit |
|---|---|
| Payment | 30% T/T deposit, 70% balance before shipment; irrevocable L/C at sight above USD 30,000 |
| Lead time | 30–45 working days after deposit (standard models) |
| Warranty | 12 months / 2,000 hours on the machine; 5 years / 10,000 hours on lithium cells |
| Container loading | On request (by model, mast, battery and packing) |
| Packing | Sea-freight export packing; masts detached and re-secured on arrival |
Send capacity, mast height and destination port — same-day FOB/CIF quotation with container loading plan.